Bendable plywood

Bendable plywood. Panels that bend without steaming.

Thin panels of fromager, a light-coloured, lightweight wood, made to be bent by hand over a former without steam. For curved furniture, counters, clad columns and interior fit-outs.

Full panels or cut to size.

Bendable plywood panel bent into an arch next to a thin rolled-up sheet
Bendable plywood bends without steaming.

Applications

Curved shapes
for furniture and interiors.

In bendable plywood the grain of almost every ply runs in the same direction. This is why the panel bends easily one way and stays stiff the other way.

Bendable plywood

Choose the direction
before the size.

Each thickness comes with the grain running in two directions. Before ordering, decide how tall the curved part needs to be: that dimension tells you which size to choose. We can supply full panels or cut them to size.

Curved furniture and counters

Rounded sides and fronts, shop and reception counters, headboards and seat backs. The panel is glued onto ribs or a supporting frame and takes the shape of the former.

Bendable plywood gives the shape, not the strength: the load-bearing structure has to be built separately.

Fit-outs and interiors

Column and pillar cladding, curved walls and ceilings, stands and stage sets. It can be veneered, laminated or painted after installation.

For interior use only: not suitable for outdoor use or direct contact with water.

Thicknesses and sizes

The Vela range

5 and 8 mm,
in three sizes.

Stocked in 5 and 8 mm in 2,500 × 1,220 and 1,220 × 2,500 mm, with 5 mm also in 1,830 × 3,100 mm. 16 mm, and 8 mm in 1,830 × 3,100 mm, are available on request.

Bendable plywood thicknesses, sizes and supply
ThicknessSizeHeight of the curveIndicative radiusSupply
5 mm2,500 × 1,220 mm2,500 mmabout 80 mmNormally available
8 mm2,500 × 1,220 mm2,500 mmabout 110 mmNormally available
5 mm1,220 × 2,500 mm1,220 mmabout 80 mmNormally available
8 mm1,220 × 2,500 mm1,220 mmabout 110 mmNormally available
5 mm1,830 × 3,100 mm1,830 mmabout 80 mmNormally available
16 mm2,500 × 1,220 mm2,500 mmabout 220 mmOn request
8 mm1,830 × 3,100 mm1,830 mmabout 110 mmOn request

The first dimension is the height of the curve: 2,500 × 1,220 mm gives a cylinder 2,500 mm high, 1,220 × 2,500 mm a cylinder 1,220 mm high. The radii are indicative values from the producer’s in-house tests: the actual radius depends on the batch, moisture and installation method. For tight curves, test on an offcut first. Quantities, current availability and lead times are confirmed in the quotation.

The photographs show bendable panels from the producer. They are not samples of an individual Vela supply.

Tell us about your project

Which shape are you making?

Describe the shape you want to build. We start from the height of the curve and the quantities to choose the thickness and size.

  • Furniture or cladding to be made
  • Thickness and height of the curve
  • Full panels or a cutting list
  • Quantity and planned finish