Wood fibre boards, cork, Celenit wood wool panels and URSA extruded polystyrene. We keep them in stock next to beams, boarding and membranes, so the whole roof or wall build-up can be loaded in one go.
For timber roofs, walls, floor underlays and small renovations.
Uses
Four materials, different jobs.
The choice depends on where the insulation goes, how much load it has to carry and how much moisture it will meet. Below is what we stock and what it is for; thicknesses and formats are in the table.
Insulation for roofs, walls and floors
Under the roof, inside the wall.
Tell us where the insulation goes and how thick it needs to be, and we will tell you which board to use and how many square metres to order, together with membranes and timber.
Cork as external insulation. Photo: LIS.
Wood wool. Photo: Celenit.
Extruded polystyrene. Photo: URSA.
Wood fibre
Boards from 10 to 100 mm for roofs, walls and floor underlays, laid on the boarding or between the studs.
Cork
40 mm boards and LIS high-density and super-compact sheets from 4 to 20 mm. For walls, roofs and floor underlays.
Wood wool
70 mm Celenit panels made of wood wool and a mineral binder. Used on walls, floors and ceilings.
Extruded polystyrene
URSA XPS boards 40 and 60 mm thick. Used where the insulation stays in contact with moisture, such as plinths and ground floors.
Photos are from the manufacturers LIS, Celenit and URSA and show the product type. Colours and finishes may vary.
The Vela range
In stock. Thicknesses and formats.
Everything in the table is normally available. Other thicknesses and formats can be requested: we check with the supplier.
Insulation: material, features, sizes and supply
Product
Features
Thicknesses and format
Supply
Wood fibre
FeaturesEcovision boards, density 160 kg/m³; 20 mm also at 250 kg/m³
Thicknesses and format20, 30, 40 and 60 mm; 1350 × 600 mm
SupplyNormally available
Wood fibre
FeaturesThick boards
Thicknesses and format100 mm; 1200 × 600 mm
SupplyNormally available
Thin wood fibre
FeaturesFor various uses, including floor underlays
Thicknesses and format10 mm; 2440 × 1220 mm
SupplyNormally available
Cork
FeaturesCork boards
Thicknesses and format40 mm; 1000 × 500 mm
SupplyNormally available
High-density cork
FeaturesLIS sheets
Thicknesses and format4 and 15 mm; 1030 × 600 mm
SupplyNormally available
Super-compact cork
FeaturesLIS sheets
Thicknesses and format10 and 20 mm; 1030 × 600 mm
SupplyNormally available
Wood wool
FeaturesCelenit panels
Thicknesses and format70 mm; 2000 × 500 mm
SupplyNormally available
XPS extruded polystyrene
FeaturesURSA XPS boards
Thicknesses and format40 and 60 mm; 1250 × 600 mm
SupplyNormally available
Thicknesses and formats depend on the batch: before you order we confirm what is available.Quantities, actual availability and lead times are confirmed in the quote. Manufacturer data sheets on request.
Tell us about your project
Request a quote.
Tell us where the insulation goes, the area and the thickness. We will tell you what you need and prepare it together with timber and membranes.