Roofing and waterproofing

Roofing. What goes on top of the beams.

Bitumen membranes, asphalt shingles, lightweight tiles and under-tile sheets, insulated panels, corrugated metal sheets, polycarbonate and roof membranes. We keep them in stock next to the timber, so boarding, beams and roof covering can be loaded together.

For canopies, garden sheds, shelters and small roof renovations.

Uses

Six materials,
one delivery.

The right covering depends on roof pitch, on the load the structure can carry and on the look you need. Below is what we stock and what it is for; sizes and colours are in the table.

Roofing and waterproofing

Membrane first,
then the covering.

The membrane or bitumen layer goes on the boarding first, then the covering. Tell us the pitch, area and structure and we will tell you which layers you need and how many rolls, packs or sheets to order.

Bitumen membranes

10 m² rolls, slate-finished in green, red or black, standard or self-adhesive; tar paper in mixed, self-adhesive and sanded versions. They waterproof boarding, canopies and small flat roofs.

Asphalt shingles

Bitumen shingles in 3 m² packs, red or green, 3-tab or 4-tab. Nailed on continuous boarding, they are the usual covering for garden sheds and gazebos.

Lightweight tiles and under-tile sheets

Roofy lightweight tiles, Ecolina sheets and Tecno Imac tile-effect sheets with ridges and flashings. They give the look of clay tiles with less weight on the structure.

Insulated panels and metal sheets

Supercoppo panels 40 mm thick, already insulated, and corrugated metal sheets in green, red or galvanised. For sheds, shelters and canopies that need to be covered quickly.

Polycarbonate

Multiwall sheets 4, 6 and 10 mm thick and 3 mm solid sheets, with joining profiles and sealing tape. For porches, verandas and canopies that must let the light through.

Roof membranes

Vapour control and breathable membranes, including Riwega USB Classic, in 75 m² rolls. Laid under the covering or the insulation to protect the timber from moisture.

Range and sizes

Photos are from the manufacturers Roofy, Isometal, PolyPiù and Riwega and show the product type; some are renderings. Colours and finishes may vary.

The Vela range

In stock.
Sizes and colours.

Everything in the table is normally available. Colours, models and lengths not listed can be requested: we check with the supplier.

Roofing products, versions, sizes and supply
ProductVersionsSizesSupply
Slate-finished membraneGreen, red or black; standard or self-adhesive10 m² rollsNormally available
Tar paperMixed, self-adhesive or sanded 4 mm10 m² rollsNormally available
Asphalt shinglesRed or green; 3-tab or 4-tab3 m² packsNormally available
Roofy tilesToscana, Vinci, Etrusca333 mm wideNormally available
Ecolina under-tile sheetsSiena red or green1104 × 2100, 3000 or 4000 mmNormally available
Tecno Imac tile-effect sheetsIcoppo Venezia terracotta; terracotta or antique tile; ridges and flashings2090 × 990 and 1840 × 980 mmNormally available
Supercoppo insulated panels40 mm thick1000 × 2100, 2800 or 3150 mmNormally available
Corrugated metal sheetsPre-painted green or red; galvanised4 and 6 m long; 930 mm wide (galvanised 732 mm)Normally available
Multiwall polycarbonate4, 6 and 10 mm thick6000 × 2100 mmNormally available
Solid polycarbonate3 mm thickFull or cut sheetsNormally available
Polycarbonate accessoriesH and U profiles, aluminium tapeFor 6 and 10 mm sheetsNormally available
Roof membranesVapour control or breathable75 m² rollsNormally available

Colours and models depend on the batch: before you order we confirm what is available. Quantities, actual availability and lead times are confirmed in the quote.

Tell us about your project

Request a quote.

Send us the roof area, pitch and structure. We will tell you what you need and how much, and prepare it together with the timber.

  • Type of roof and use
  • Area and pitch
  • Product, colour and sizes
  • Timber to load with it