Timber for outdoor use

Pressure-treated pine.
Boards, battens and beams.

Planed pine, vacuum-pressure treated against fungi and insects, for fences, pergolas, cladding and garden structures. Solid wood for boards and battens, glulam for beams.

Solid wood

Boards, battens and scantlings.

For fences, cladding, trellises and frames.

Strapped pack of green pressure-treated pine scantlings in the yard
Treated pine scantlings in the Vela yard.

Solid timber planed on all four sides, in the sections most used outdoors: from 20 mm boards to 90 × 90 scantlings.

See the sections

Glulam

Glulam beams.

For pergolas, canopies and structures.

Treated pine glulam beams with the lamellas visible at the end
The glued lamellas show at the end grain.

Pine lamellas glued together make up the beam. The build helps limit cracking and twisting, and it is the choice for large sections and longer lengths.

See the sections

Photos taken in the Vela yard. Colour varies from batch to batch.

The treatment

Protected for outdoor use.

Untreated pine does not last long outdoors. Vacuum-pressure treatment gives it the protection it lacks by nature.

Vacuum and pressure

In the treatment cylinder the preservative is forced into the wood through vacuum and pressure cycles. It does not sit on the surface like a paint: it penetrates the outer layer of each piece.

Green or brown

Treated timber has a greenish tone. On request we treat it a second time to give it a brown colour. Outdoors, with sun and rain, both turn grey over time.

Above ground or in the ground

The standard treatment is for outdoor timber that does not touch the ground. Parts set in the ground or always wet need a heavier treatment: mention it in your request.

Cuts and holes

Cuts, holes and end trims made after treatment expose unprotected wood. Brush them with a suitable preservative before installation.

Made-to-measure pieces

If you need sections or lengths outside the range, we can cut the timber to size and treat it after cutting. Mention it in your request.

The Vela range

Sections compared.

Finished sizes, after planing. Lengths usually from 3 to 6 m.

Pressure-treated pine · sections in millimetres
ProductSectionsLengths
Boards and battensSolid wood 20 × 95 · 20 × 145 · 25 × 95 · 25 × 115 · 25 × 145 · 35 × 95 mm 3–6 m
Scantlings and joistsSolid wood 45 × 45 · 45 × 70 · 45 × 95 · 45 × 120 · 45 × 145 · 70 × 70 · 90 × 90 mm 3–6 m
BeamsGlulam 45 × 95 · 45 × 115 · 45 × 145 · 55 × 145 · 70 × 70 · 80 × 120 · 90 × 90 · 120 × 120 · 140 × 140 · 160 × 160 mm 3–6 m

Origin: Scots pine from Northern Europe (Scandinavia and Germany). Not every combination of section and length is always in stock. Sizes, quantities and lead times are confirmed in the quotation.

More outdoor pine Looking for round posts or decking? Turned pine posts and 28 × 146 decking have their own pages. Pine posts Decking

Let’s talk about your order

Do you already have a cutting list?

Send us the sections, lengths and number of pieces you need. If you are still planning, tell us what you are building.

  • What you are building
  • Sections and lengths
  • Number of pieces or linear metres
  • Brown colour, pieces in the ground or cuts to size