Natural wood veneer

Wood veneer. Real wood leaves for veneering.

Thin leaves sliced from the log, to be glued onto panels, doors and furniture. We stock bundles of natural Forty veneer, spliced 305 × 122 cm sheets and Italian walnut leaves; other species we source on request.

Whole bundles or spliced sheets, chosen in the warehouse.

Stacked bundles of veneer in a warehouse and a door faced with panels of different species
Bundles of veneer in the supplier’s warehouse. Photo: Forty.

Applications

Two forms,
two ways of working.

Veneer comes in two forms. Bundles suit those who lay up panel faces themselves; a spliced sheet is ready to press onto a full panel.

Natural wood veneer

Choose the wood
by looking at it.

Every log has its own colour and figure: the same species name can give very different leaves. For visible work, it is worth seeing the bundle or sheet before ordering. The photos below show the typical grain of some species.

Bundles of natural leaves

The leaves stay in the order they come off the log, so the grain repeats from one leaf to the next. They are book-matched or slip-matched to make faces for doors, cabinet fronts and panels.

1 or 2 mm thick, 2.2 to 4.2 m long, natural log width.

Spliced sheets 305 × 122 cm

Several leaves already joined along their edges make a sheet the size of a standard panel. It is pressed onto plywood, MDF or particleboard without having to lay up the face.

0.6 or 1 mm thick, depending on the species. Handy for full panels and small batches.

Species and sizes

The Vela range

In stock and
on request.

Forty bundles in oak, American walnut, ash and chestnut, spliced sheets in eight species and Italian walnut leaves are normally available. Other species are ordered on request.

Wood veneer forms, species, sizes and supply
FormSpeciesSizesSupply
Bundles of natural leavesoak, American walnut, ash, chestnut1 or 2 mm; length 2.2–4.2 m; natural widthNormally available
Spliced sheetsmaple, cherry, pear, tulipwood, teak, rosewood, tanganyika, wengé0.6 or 1 mm; 3,050 × 1,220 mmNormally available
LeavesItalian walnut0.6 mm; size to be confirmedNormally available
Other speciesTo be agreedTo be agreedOn request

The species available change from batch to batch: before you order, we tell you which bundles we have and send you a photo. Quantities, current availability and lead times are confirmed in the quotation.

The photographs are from the supplier Forty and show the typical grain of each species. Colour and figure vary from log to log.

Tell us about your project

Which veneer do you need?

Tell us the species, the quantity and what the veneer will be glued onto. We tell you what is in stock and, if needed, send photos of the bundles.

  • Species and work to be done
  • Bundles or spliced sheets
  • Area or number of leaves
  • Substrate it will be pressed onto